Request a quotation
← Manufacturer directory
Xingtai Transformer Co., Ltd. logo

MANUFACTURER PROFILE

Xingtai Transformer Co., Ltd.

A Hebei transformer manufacturer with distribution, wound-core and industrial-duty product routes.

Discuss your project

Xingtai Transformer traces its predecessor, Xingtai Transformer Factory, to 1970 in its own company introduction. Its published portfolio covers oil-immersed and dry-type transformers, amorphous and three-dimensional wound-core designs, mining, rectifier and furnace transformers, and box-type substations. The introduction places the portfolio at 110 kV and below. Buyers can use this breadth to frame a distribution or industrial inquiry, while keeping the offered rating and construction specific to the selected equipment.

Chinese entity
邢台变压器有限责任公司
Published contact location
Economic Development Zone, Renze District, Xingtai, Hebei
Company-described predecessor
Xingtai Transformer Factory; 1970
Portfolio envelope
110 kV and below; design-specific ratings required
Industrial routes
Mining, rectifier, furnace and packaged substations
01

Match the name and the Renze location

The manufacturer's Chinese name is 邢台变压器有限责任公司. Its contact page gives the Economic Development Zone in Renze District, Xingtai, Hebei. The company introduction describes the predecessor as 邢台市变压器厂 and dates that history to 1970. That distinction matters when older documents carry a factory name while a quotation uses the current company name.

For purchasing, match the manufacturer, contracting entity and report issuer to the name on the offer. Use the current commercial address on the contract and delivery documents. The historical predecessor date explains the company's own narrative; it should not be used to infer uninterrupted certification, unchanged ownership or the age of a particular production line.

References: [1] [2]

02

Separate distribution construction from industrial duty

Scroll sideways to compare all columns.

Published portfolio routeWhat to define in the inquiry
Oil-immersed distribution or power equipmentVoltage combination, liquid arrangement, cooling and loss guarantees
Dry-type equipment, including the SGB website entryInsulation construction, enclosure, ventilation and temperature-rise requirement
Amorphous-core equipmentExact model construction and guaranteed no-load loss
Three-dimensional wound-core equipmentCore arrangement, installation envelope and complete loss schedule
Mining, rectifier or furnace transformersLoad characteristics, electrical interfaces and application-specific duty
Box-type substationsTransformer, switchgear and enclosure scope as one defined package

Xingtai's introduction names several construction routes and several applications. Oil immersion and dry insulation describe different transformer arrangements. Amorphous-core and three-dimensional wound-core descriptions concern the magnetic-core route. Mining, rectifier and furnace duty instead describe how the equipment is intended to operate. An inquiry becomes clearer when these two dimensions are specified separately.

The website's “110 kV and below” statement is a portfolio envelope. It does not mean each dry-type, mining or packaged product is available at 110 kV. A supplier response should attach the actual voltage and capacity to each proposed equipment item.

References: [1]

03

The S13-M·RL page provides a more concrete construction example

Xingtai's own product page identifies S13-M·RL as a sealed, three-dimensional wound-core distribution transformer with off-circuit tap adjustment. It describes a joint-free wound core and oxygen-free copper coils, with dotted adhesive insulating paper between layers. This is a specific construction description that helps distinguish the listed route from a generic oil-filled product category.

The manufacturer describes outdoor distribution as an application, including urban and rural networks. Its statements about lower loss and noise remain qualitative: this particular page does not give a rated-capacity loss table or a measured sound schedule. A buyer should ask for the offered model's guaranteed values rather than assign the product-family description a numerical efficiency rating.

The text also refers to a corrugated tank and several tank-leak test methods, but that paragraph switches to an amorphous-transformer label. We have therefore kept the unequivocal core and coil descriptions above and left the selected tank design to the supplier's drawing. This preserves useful details without combining inconsistent labels into an invented specification.

References: [4]

04

A standards record with a defined role

The national standards platform lists 邢台变压器有限责任公司 among the drafting organisations for plan 20253303-T-604, “Synthetic organic esters—Guidelines for maintenance and use in electrical equipment.” The plan was issued on 6 August 2025; the record viewed for this review shows it at the approval stage.

This is a participation record for a standards plan. It is not a certificate for an Xingtai transformer, and it does not show that every oil-filled product uses synthetic ester. If an inquiry requires an ester fluid, ask for the proposed fluid specification, compatibility of the insulation system and the maintenance documents applying to that exact design.

References: [3]

05

Prepare the special-duty information before asking for a price

A furnace or rectifier inquiry needs more than the normal distribution-transformer rating. Describe the connected process, supply voltage, output arrangement and expected operating duty. Where a converter is involved, provide the converter-side requirements and interface responsibilities. These are questions for the technical proposal, rather than performance values inferred from the company's product categories.

For mining equipment, state the installation environment and the approvals required by the destination and application. The published mining-transformer category establishes a product route, not a blanket approval for every mine or hazardous location. For a box-type substation, define the incoming and outgoing switchgear, metering, protection and enclosure requirements together with the transformer.

Keep each equipment line separate when comparing replies. An oil-filled distribution unit, a furnace transformer and a complete substation package cannot be evaluated with the same incomplete specification. A precise schedule lets the factory respond to its actual portion of the project and makes omissions visible early.

References: [1]

06

Put losses, impedance and delivery on the same drawing revision

For distribution equipment, state the required continuous kVA, primary and secondary voltages, frequency, vector group, taps and winding material. Require no-load and load losses with the reference temperature, tolerance and acceptance method, plus impedance under the agreed rating conditions. A core-family name is useful context, but it does not replace these measurable requirements.

Request a general-arrangement drawing with cable positions, lifting provisions, mass and dimensions. Add the actual altitude, ambient profile and installation access. If the order includes dry-type equipment, identify the enclosure and cooling arrangement; if it includes a liquid-filled unit, define the liquid and installation constraints.

Tie the guaranteed data, drawing approval and test plan to one revision of the proposed model. Ask for the serial-numbered routine-test documents delivered with the equipment and identify any additional witnessed or type-test evidence required by the project. This gives a practical path from Xingtai's broad catalogue to a specific, comparable offer.

A project brief the factory can respond to

Use this list to prepare your requirements. Checking an item only marks your preparation on this page.

0 of 6 items prepared

Prepare an RFQ for XINGTAI TRANSFORMER

Questions buyers ask

Does the 110 kV portfolio statement apply to every product?

No. It describes the company's published overall range. Capacity, voltage and construction must be confirmed for the selected equipment item.

Is an amorphous-core model automatically an ester-filled transformer?

No. The core construction and insulating liquid are different specification choices. Define both where an oil-filled design is requested.

Is standards drafting participation a product approval?

No. The national-platform record identifies participation in a standards plan, not certification or acceptance of an offered unit.

What is useful for replacing an older Xingtai transformer?

Send the existing nameplate, electrical data, drawings, dimensions, terminal arrangement and actual operating conditions, then request the proposed replacement's guaranteed schedule.

Sources

4 sources · checked 8 October 2026

Prepared by PowerTransformerB2B. Checked 8 October 2026. The sources below identify the published company information and any dated public records used for this profile.

Company catalogues describe product families and options. Before you order, ask the manufacturer for the type-test report and acceptance documents for your exact model and rating.

  1. [1] Company introduction and product routesXingtai Transformer · Manufacturer original
  2. [2] Renze contact location and company identityXingtai Transformer · Manufacturer original archive
  3. [3] 20253303-T-604 synthetic organic ester maintenance/use standard planNational Standards Information Public Service Platform · National standards plan
  4. [4] S13-M·RL sealed three-dimensional wound-core product descriptionXingtai Transformer · Manufacturer original product page