Request a quotation
← Manufacturer directory
Jiangsu Huapeng Transformer logo

MANUFACTURER PROFILE

Jiangsu Huapeng Transformer

Power-transformer voltage tiers, specialised dry-type equipment and offshore-wind installation routes from Liyang.

Discuss your project

Jiangsu Huapeng's catalogue is organised around distinct power-transformer voltage tiers and specialised installation duties. Alongside distribution equipment, it lists 110–220 kV, 330–400 kV and 500 kV-and-above categories, dry-type transformers and renewable-energy equipment. Its published address is No. 68 Kunlun Development Zone, Liyang, Jiangsu. For an international buyer, the useful starting point is the actual electrical tier and installation arrangement, followed by a design-specific performance and interface schedule.

Chinese entity
江苏华鹏变压器有限公司
Published address
No.68 Kunlun Development Zone, Liyang, Jiangsu
Power catalogue tiers
110–220 kV; 330–400 kV; 500 kV and above
Offshore installation entries
Nacelle oil-filled and tower dry-type routes
Standards role
Listed drafter: GB/T6451-2023
01

Choose the voltage tier before the product family

Scroll sideways to compare all columns.

Published catalogue tierProcurement context
Distribution transformersLocal distribution duty with an exact voltage and loss schedule
110–220 kVSubstation/main-transformer specifications and interface drawings
330–400 kVHigher-voltage system duty and transport/install constraints
500 kV and aboveProject-specific system, insulation and test requirements
Dry-type and new-energy equipmentConstruction and application choices kept separate from overall voltage limits

The manufacturer's English catalogue separates three higher-voltage tiers from distribution, dry-type and new-energy categories. The current company introduction states a wider overall product envelope up to 850 kV and a maximum capacity of 2,400 MVA. Those are company-published portfolio limits; they do not describe every catalogue entry or every possible voltage/capacity combination.

Start an inquiry with the project's nominal and maximum system voltage, continuous rating and winding arrangement. Then identify the regulation, cooling and insulation requirements. This prevents a broad company range from being mistaken for the specification of the offered unit.

References: [1] [2]

02

Offshore wind: nacelle and tower installations are different requests

Huapeng's catalogue explicitly identifies S-8200/35 as a nacelle-mounted oil-immersed transformer for offshore wind. It also lists SCSFB11-7400/35 as a tower-mounted dry-type route, alongside wind-power combination transformers and pre-assembled substations. These entries are useful because they identify different installation positions rather than treating all wind equipment as one interchangeable category.

A nacelle enquiry should provide the available envelope, mass constraints, access/lifting arrangements and electrical interfaces defined by the turbine design. A tower installation needs its own room, access and cooling arrangements. The supplier should confirm the proposed model and its guaranteed performance against those conditions, rather than quote solely against the published family name.

The S-8200/35 detail page identifies the model and application but does not provide a model-specific loss table in its body. Its general transformer explanation should not be read as an offshore test result. Ask for the actual drawings, environmental requirements and inspection schedule applying to the proposed unit.

References: [2] [3]

03

The dry-type catalogue includes several distinct duties

The Chinese product index names DC10-5000/20 single-phase dry-type equipment, DKSC grounding transformers, SCZ10-20000/35 on-load regulated equipment and ZQSC rail-transit dry-type transformers. It also lists a 1E dry-type nuclear-power entry. These are published catalogue identifications, not a shared approval or specification that can be transferred among those duties.

For grounding equipment, the inquiry should identify its electrical role and connection requirements. For regulated equipment, state the tap duty and required control interfaces. For rail-transit equipment, define the converter or station-load arrangement. Any nuclear-related procurement must obtain the currently applicable licensing, qualification and acceptance documents for the precise scope, rather than rely on a catalogue title.

This variety makes it important to identify the intended equipment role early. The supplier's response should provide a data sheet specific to that role, including continuous/duty ratings and the interface conditions that make it suitable for the project.

References: [2]

04

Liquid choice is visible in the catalogue

Huapeng lists conventional oil-filled distribution equipment, a silicone-oil distribution entry and a 5,000 kVA low-frequency vegetable-oil box-transformer entry. It also names amorphous-core SH(B)15-M-500 equipment. Liquid selection, core route and application frequency are separate choices; the presence of one catalogue entry does not mean that every transformer uses the same insulating medium.

If a project requires an ester or another particular liquid, name the fluid requirement and ask for its compatibility with the complete insulation system. Define the frequency as well as the voltage and rating when a low-frequency application is involved. For a core-loss comparison, use the offered model's guaranteed no-load loss under the agreed conditions, instead of treating “amorphous” as a numerical guarantee.

References: [2]

05

A 2026 export report supplies dated context

A Changzhou government-site report published on 29 April 2026 describes large transformers undergoing testing at Huapeng before shipment to Europe. It reports the company's first-quarter self-operated exports at RMB 740 million and discusses replacement-market requirements for interfaces, dimensions and performance. This is a dated reporting context, not a quoted delivery lead time for a new order.

For a replacement project, those interface issues are directly relevant to preparing the brief. Supply existing nameplates, terminal locations, foundation drawings, protection details and the permissible transport envelope. Ask the manufacturer to identify deviations from the old installation before drawing approval. A replacement transformer should be compared against the actual site requirements, not only the capacity of the old unit.

References: [4]

06

The standards record and the order guarantee have different roles

The national standards platform lists 江苏华鹏变压器有限公司 as a drafting organisation for GB/T 6451-2023, “Technical parameters and requirements for oil-immersed power transformers.” The record gives publication on 7 September 2023 and implementation on 1 April 2024. That establishes a documented standards role; it does not certify a proposed transformer or replace order-specific testing.

An international inquiry should name the standards and editions applicable to its destination project and require a clear compliance statement for the selected design. Request loss guarantees, impedance, winding material and tolerances together with the voltage, rating and reference temperatures. Keep any existing type-test evidence tied to a relevant design and identify additional tests required by the contract.

References: [5]

07

Define drawing, transport and commissioning responsibilities

For a large main transformer, ask for the transport configuration, mass and dimensions, site assembly scope, lifting/handling provisions and destination commissioning responsibilities. Identify which components travel separately and what tests or inspections are needed after installation. These are project requirements to settle with the supplier, not assumptions made from Huapeng's overall capacity envelope.

For a wind or specialist dry-type inquiry, start from the actual installation envelope and electrical role described above. Request the selected model's performance schedule and interface drawings, then align commercial milestones with drawing approval, manufacturing, testing and delivery. This makes Huapeng's broad catalogue navigable while keeping the purchasing decision attached to a concrete design.

A project brief the factory can respond to

Use this list to prepare your requirements. Checking an item only marks your preparation on this page.

0 of 6 items prepared

Prepare an RFQ for HUAPENG

Questions buyers ask

Is 850 kV available for every catalogue family?

The company describes it as an overall portfolio limit. The selected voltage, capacity and construction need to be confirmed together for the offered model.

Are nacelle and tower-mounted wind transformers equivalent?

They are separate published installation routes. Provide the actual position, access, mass and cooling constraints required by the wind-turbine project.

Does the April 2026 export report establish a current lead time?

No. It is a dated report. A new order needs its own manufacturing, testing and delivery schedule.

Does a nuclear catalogue title establish licensing for my order?

No. Obtain the current scope-specific licensing and qualification documents required by the project, alongside technical acceptance records.

Sources

5 sources · checked 8 October 2026

Prepared by PowerTransformerB2B. Checked 8 October 2026. The sources below identify the published company information and any dated public records used for this profile.

Company catalogues describe product families and options. Before you order, ask the manufacturer for the type-test report and acceptance documents for your exact model and rating.

  1. [1] Current company introduction and portfolio envelopeJiangsu Huapeng · Manufacturer original
  2. [2] Bilingual product index and installation routesJiangsu Huapeng · Manufacturer original
  3. [3] S-8200/35 nacelle-mounted oil-immersed transformerJiangsu Huapeng · Manufacturer original
  4. [4] Changzhou transformer exports report, 29 April2026Changzhou government website / Changzhou news media centre · Dated original local reporting
  5. [5] GB/T6451-2023 oil-immersed transformer standard recordNational Standards Information Public Service Platform · National standard original